Feeder pillars

Feeder pillars

Products

MORTEN I DA LED

product category
  • post luminaire
light requirements
  • low, medium
colour
  • DB 703
luminaire head
  • made of stainless steel and aluminium; powder coated; to be opened upwards
glazing
  • PMMA RESIST, clear, flat, high-impact resistant
wiring
  • completely wired, incl. cable until access door
light distribution
  • asymmetrical wide beam
total height
  • 6.0 m
column
  • incl. straight pole with special cut end in the shape of a whistle, made of hot-dip galvanised steel; access door for cable junction box; powder coated, single colour
  • incl. straight pole with special cut end in the shape of a whistle, made of hot-dip galvanised steel; access door for cable junction box; powder coated, 2 coloured
installation
  • with root to be set into the ground
  • with flange plate to be screwed on a concrete foundation on site or on an additional bolt-on root
  • with fl ange plate to be screwed on a concrete foundation on site or on an additional bolt-on root
accessory
  • cable junction box, pole accessories, back light shield for non-glare on the rear side – to be ordered separately
luminaire body
  • 1 bracket
  • 2 brackets
application areas
  • car parks
  • cycle lanes
  • factory premises
  • holiday parks
  • home for elderly people
  • hotels
  • local distribution roads
  • main streets
  • parks
  • pedestrian lanes
  • pedestrian zones
  • residential roads
  • schools
  • squares
height of light source
  • 4.5
  • 6.0
wind-exposed area
  • 0.73
  • 0.56

DA 028 LED - 2 brackets - 4.50m

DA 028 LED - 2 brackets - 6.00m

DA 028 LED - 1 bracket - 6.00m

DA 028 LED - 1 bracket - 4.50m